From where I stand, the customizations for such a massive car should be kept to minimum, otherwise it could fall into the abys with absurd make-overs that would spoil its genuine personality and appealing looks.

Designed for those who want a classy and luxurious yet comfort ride, the 7-Series should stay the way it is, especially since some of the models already come with M Performance goodies that take the level of customizations to the highest level. However, should you opt for new wheels, then that`s a different story.

Speaking of new wheels, the BMW 740iL highlighted in the media gallery below, wears some from ADV.1 Wheels tuning firm, which perfectly complement the luxury saloon`s magnificent Alpine White body wrap.

We are dealing here with ADV10R M.V2 Competition Spec wheels, measuring 22 x 9.5 and 22 x 11 front and rear, respectively, and finished in Matte Bronze. And in contrast with the car`s exterior colour, it provides a more aggressive look and stance.

As for exterior visuals, the owner of this 740i decided to leave it intact. Like I already said, it doesn’t need too much make-overs, and so it happened here as well. Instead, we should admire the new wheels installed by R1 Motorsport tuning company.

In the engine department, the model comes with a 3.0-liter BMW TwinPower Turbo inline six-cylinder engine, with a good 320 horsepower and 450 Nm of torque. This allows a sprint from 0 to 100 km/h in a good 5.4 seconds, at a topping of 250 km/h.

You can find more details about this special ride in the media gallery below. Enjoy and don’t forget to share your opinions with us!

The post Alpine White BMW 740iL Sits on Gorgeous ADV.1 Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

The latest one to be seen flexing its muscles in the virtual world is the below BMW M6 all wrapped in the gorgeous Black Sapphire and tweaked with the one-off and high-performance wheels from ADV.1 tuning company.

Even if at the exterior, the technicians haven’t added a plethora of aftermarket parts, the model does come handy with a couple of bits, like new front and rear bumpers and slightly revised side sills.

But what really counts at this particular model is the wheels it rides on. We are dealing here with the ADV05R Directional M.V2 Competition Spec wheels, with a five-spoke split and directional design, which increase the car`s aggressive wheels.

The wheels are extremely wide, measuring 21 x 9.5 and 21 x 12 front and rear, respectively, providing better grip and adding greater looks, thanks to the Brushed Aluminum with Gloss Clear finish.

As much as we would have loved seeing this M6 tweaked with a power boost under the hood, that didn’t happen, at least not for now. We surely hope for a new treatment later on.

The BMW M6 came out with a potent 4.4-liter BMW TwinPower Turbo pot with 560 horsepower and impressive 680 Nm of torque. Just like the BMW X6 M, the M6 also comes with a sprint from 0 to 100 km/h in an impressive 4.0 seconds.

The performance is also achieved thanks to the seven-speed DCT (Dual Clutch Transmission) system which sends the power to the rear wheels. The top speed is also set at 250 km/h. The model can be admired in the media gallery below provided by William Stern Photography. Enjoy!

The post BMW M6 in Black Sapphire Sits on ADV.1 Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

The technicians from ADV.1 are back into the spotlights with another outstanding project carried out on the smashing BMW M4, now looking high-class with the Alpine White body wrap and carbon fiber components on the body.

Besides the exquisite colour, this particular model has also received some extra tweaks at the exterior, including carbon fiber front lip spoiler, rear aero diffuser and rear decklid. And such outstanding body features require some special wheels as well.

And the aftermarket specialists from ADV.1 Wheels did delivered as promised, the tuner adding the ADV5.2 M.V2 CS Series wheels, measuring 20×9 and 20×10.5 front and rear and looking smashing on the model. They also improve the car`s stance thanks to their lightweight properties and construction.

In the engine department, the BMW M4 packs the same 3.0-liter TwinPower Turbo inline six-cylinder engine, with 431 horsepower and 500 Nm of torque on board. The power allows a sprint from 0 to 100 km/h in 4.3 seconds with a standard six-speed manual; when fitted with the seven-speed M-DCT, the model needs just 4.1 seconds to reach 100 km/h. The top speed is electronically limited to 250 km/h.

In case you want to admire the BMW M4 on ADV.1 Wheels, then you should take a look at the media gallery below released by no other than C-Kraft Photography. Enjoy the view and don’t forget to share your opinions with us!

The post Alpine White BMW M4 Sits on ADV.1 Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

It involves a massive tuning program carried out by the technicians from ADV.1 wheels, which have fitted a wide aero kit on the BMW M4, and the result is what you get in the photo gallery below.

Liberty Walk initially began creating extremely wide body kits for supercars like Lamborghini, Ferrari or McLaren, but just like Vorsteiner or Manhard, they have also turned their attention towards BMW products. Why? Because they come with an extremely appealing and aggressive design that allows for easy and complete modifications.

This lad here coming with the LB kit has it all: carbon fiber front diffuser, rear diffuser, bolt-on wide bolt-on fenders, side diffusers, trunk spoiler, air suspension, wheel spacers and so on.

The entire LB kit is complimented with the ADV.1 wheels, involving their latest high-forged ADV05 Track Spec S alloys, measuring 20×10.5 and 20×112 front and rear and looking awesome with the Polished Smoke finish and Polished Liquid Smoke lips.

As expected, this BMW M4 has not received any mods under the hood, the model still packing the 3.0-liter BMW TwinPower Turbo inline six-cylinder engine, with 430 horsepower and 500 Nm of torque. Hooked to a six-speed manual, the car is capable of sprinting from 0 to 100 km/h in 4.3 seconds, but with the seven-speed DCT, the same sprint is done in just 4.1 seconds. The topping also stands at 250 km/h.

The post How about a BMW M4 with Liberty Walk and ADV.1 Wheels? appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

This is true, especially if it involves a one-off BMW M3 like this one seen here, wearing the gorgeous Alpine White body wrap. This particular model is also the lucky owner of plenty tweaks from Vorsteiner, ADV.1 Wheels and Akrapovic.

Unfortunately, there are no sign of any mods added under the hood, this BMW M3 packing the stock 3.0-liter M TwinPower Turbo inline six-cylinder engine, with 431 horsepower and 500 Nm of torque. Hooked to the standard six-speed manual, the sedan sprints from 0 to 100 km/h in 4.3 seconds, while equipped with the seven-speed dual-clutch, the same straight line is run in just 4.1 seconds. The topping stands at 250 km/h.

However, the body styling is visibly updated, as the model received the new EVO Front Spoiler and the GTS Rear Diffuser, both courtesy to Vorsteiner. At the rear end, the most impressive highlight is the Akrapovic`s high-performance evolution exhaust sytem, which makes the car`s engine sound more wilder.

The entire tuning kit is complemented by the 20×9.5 and 20×11 front and rear ADV M.V2 Competition Spec directional wheels, finished in Brushed Gunmetal. The model also received the high-performance H&R lowering springs, which add greater stance.

The BMW M3 is also highlighted in the photo gallery below created by Thomas Van Rooij Photography.

The post BMW M3 in Alpine White Gets Plenty of Tweaks from Aftermarket Shops appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

Well, this is an Individual color alright which comes handy with a new set of wheels, courtesy to no other than the famous ADV.1 Wheels tuner.

The 2016 YM has not received any particular modifications to the body, except for the LCI taillights, which makes it more aggressive and appealing.

The new look and shape are perfectly matching the ADV5.0 Track Function CS wheels, sized 20×9.5 and 20×11 front and rear, all finished in Manbronze. The track-look makes it perfect for a photo session.

The 2016 F80 BMW M3 has not received any mods under the hood, this model still packing the same 3.0-liter BMW TwinPower Turbo engine with 431 horsepower and 500 Nm of torque. This is just enough to sprint from 0 to 100 km/h in just 4.3. seconds via a six-speed manual transmission.

However, with the optional M-DCT gearbox, the new M3 is capable of the same performance as the previous model, meaning 4.1 seconds for the same flat run! Enjoy the photo gallery released by ADV.1 Wheels tuner!

The post Individual Red 2016 F80 BMW M3 Sits on ADV.1 Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

This Alpine White BMW M6 is featuring the Vorsteiner rear GTS aero diffuser which increases the airflow for the rear, allowing an increase in the car`s performance.

But the real thing that makes this BMW M6 standing out from the crowd, is the new set of ADV05R MV.2 CS alloy wheels.

The wheels are sized 21×9.5 and 21×12 front and rear, all finished in the exquisite Brushed Cognac / Brushed Cognac, including the wheels` lip. The finish perfectly complements the entire Alpina White exterior of the car.

No mods were carried out under the hood, this Alpine White BMW M6 still packing the 4.4-liter BMW TwinPower Turbo V8 engine, with 560 horsepower and 500 lb-ft of torque.

The sprint from 0 to 100 km/h is done in just 4.3 seconds, with the help of the Launch Control system, the sports car also coming with a top speed of 250 km/h.

Wheels Performance tuner has released a small photo gallery with their latest project, enjoy and don’t forget that your opinion does count!

The post BMW M6 Sits on ADV.1 Wheels, Installation by Wheels Performance appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

This BMW 1M seen here is also looking refreshed, thanks to some slight mods carried out at the body and the new set of wheels from ADV.1 Wheels tuner.

The BMW 1M is wearing the gorgeous Alpine White body wrap, along with revised bumpers at the front and rear. The new look is complemented by the new super light wheels, courtesy to ADV.1 Wheels tuner.

We are dealing here with the ADV5 MV2. Wheels, sized 20×9 at the front and 20×10 at the rear end, which make it more standout and more aggressive.

The entire installation was carried out by aftermarket specialists from Indonesian based Antelope Ban tuning company.

Under the hood, there were no power upgrades announced, the 1M packing a retuned 3.0-liter N54 twin-turbocharged engine, with 340 horsepower and 450 Nm of torque. The model can sprint from 0 to 100 km/h in just 4.3 seconds, via a six-speed manual transmission. The top speed is electronically limited at 250 km/h.

The post BMW 1M with ADV5 MV.2 Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

This F80 BMW M3 has received new body parts, like the one-off front lip spoiler, deck lid spoiler, rear diffuser which comes with the AWE Tuning`s exhaust system and the 90mm Diamond Black tips. All these new body tweaks make the M3 a more outstanding car.

Besides the carbon fiber kit, the F80 BMW M3 is also wrapping the 19-inch ADV.1 Wheels, measuring 10-inch up-front and 12-inch at the rear, all wearing the Michelin Pilot Super Sports tires, with 275/20/19 and 295/30/19 front and rear.

There are no signs of any mods carried out under the hood, this F80 BMW M3 still packing the famous 3.0-liter turbocharged engine, also found on its sibling M4 Coupe, and which develops a total output of 425 horsepower and 560 Nm of torque.

The sedan is thus capable of sprinting from 0 to 100 km/ in just 4.3 seconds when hooked to a six-speed manual transmission, but with a seven-speed DCT, the M3 is capable of reaching 100 km/h in 3.9 seconds.

The post F80 BMW M3 by TAG Motorsports appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

There is no surprise that the rear axle gets wider wheels as this helps with traction and control. The ADV.1 rims got a multi-spoke design and a black finish. Besides the new set of wheels, this particular BMW 1-Series M Coupe benefits from a special grey wrap and a new rear spoiler.

Power is offered by an improved 3.0-liter TwinPower Turbo engine, known as N54. With a total output of 340 horsepower and 450 Nm of torque, the small German model is also fast, not just good-looking.

If that wasn’t enough, there’s an overboost function that adds extra 50 Nm of torque when you need them. Taking this car from a standstill to 100 km/h takes only 4,3 seconds with a top speed limited at 250 km/h.

The model is fitted with a six-speed manual transmission, so you’ll get a better feeling while pushing the pedal to the floor.

The post BMW 1-Series M Coupe by ADV.1 Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.