While we have seen the magnificent F80 BMW M3 in different shades and colours, along with cool aero kits, the Sunburst Gold Metallic from BMW Individual is perhaps the most prolific, as it highlights the car`s every single design line. The last we saw it wear this exquisite colour was around a year ago, with the mods being carried out by Californian-based tuner EAS.

Our model in question and gorgeously highlighted in the media gallery below, wears the same majestic colour, while it shows its increased aggressiveness, thanks to the new and vintage-like HRE 540 wheels.

The wheels involved used to be the hottest back in the 90`s and were seen on rides like the E46 BMW M3, Porsche 996 Turbo or C5 Corvette. Now, in the 2018 iteration, the wheels are set to commemorate 40 years of the tuner`s successful existence on the market. And what better way to do that then have them wrapped on the gorgeous BMW M3.

The new edition are sized 20 x 8.5 and 20 x 10.5 front and rear, respectively, and are finished in the mind-blowing Satin Black, which perfectly complements the car`s exterior paintjob.

Powering the Sunbrust Gold Metallic F80 BMW M3 is the famous 3.0-liter M TwinPower Turbo inline six-cylinder engine with 431 horsepower and 500 Nm of torque, enough to deliver a sprint from 0 to 100 km/h in just 4.3 seconds, when hooked to a six-speed manual transmission. However, equipped with a seven-speed MDC-T, the same sprint is done in just 4.1 seconds.

More details of the F80 BMW M3 by HRE Wheels can be found in the media gallery below. Enjoy and tell us if you like the new wheels!

The post F80 BMW M3 in Sunburst Gold Metallic Wears HRE`s Magnificent 540 Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

Lately, we have seen a dozen of M4 GTS models receiving plenty of customizations around their bodies, inside the cabin, as well as under the hood. However, each one came out with an impressive set of new wheels from different wheel tuning firms like Vorsteiner, Vossen Wheels, HRE Wheels or Wheels Boutique.

This time we have the chance to see the exquisite BMW M4 GTS with a set of new wheels from HRE tuner, a frequent firm that deals with BMW customizations.

Even is the M4 GTS is available in the stock form with high-performance wheels – M Carbon Compound wheels, which are track-focused – the model can also be customized with other professional wheels from tuning firms like HRE.

In this case, the technicians from Wheels Boutique have installed the high-performance HRE R101 Lightweight wheels, also seen on other models like the M2, M3 or standard M4. They measure 20 x 9.5 and 20 x 11 front and rear, respectively, and are finished in Satin Charcoal. A new set of Michelin Pilot Sport 4S tires were also installed. These are forged wheels specifically built for road use, providing increased stance and better grip. They also make the M4 GTS in question more aggressive.

At the exterior, the BMW M4 GTS comes in standard form while under the hood the M4 GTS brags with a stock yet powerful 3.0-liter BMW TwinPower Turbo inline six-cylinder engine (it is not the same engine as its smaller sibling M4), churning out an impressive 493 horsepower and 443 lb-ft of torque. Paired to a seven-speed M Double Clutch Transmission, equipped with Drivelogic, the M4 GTS sprints from 0 to 100 km/h in a staggering 3.6 seconds.

The post BMW M4 GTS with HRE Wheels, Installation by Wheels Boutique appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

The F80 BMW M3 along with its sibling F82 BMW M4 still remain the most haunted models in the tuning segment, coming with thousands of exquisite aero kits and performance packages, put together by famoust aftermarket specialists like Hamann, G-Power, Prior Design, Vorsteiner, Manhart and so on.

Anothe standout model is the below F80 BMW M3 coming with the exotic Austin Yellow body wrap and HRE`s high-performance wheels.

Most BMW M3/M4 owners usually resort to aftermarket customizations to make them more standout, and when it comes to fitting them with outstanding wheels, they usually turn their attention towards HRE Wheels or Vorsteiner. In this case, the former tuner clearly has a shot.

We are dealing here with the HRE RC 100 alloy wheels, each one costing around $1,300 and featuring the l-beam spoke geometry; this makes them extremely durable, strong and efficient especially on the track. Thanks to the new set of wheels, this F80 M3 would be capable of some impressive acceleration from 0 to 100 km/h.

The wheels also measure 20 x 8.5 and 20 x 10.5 front and rear, respectively, and are finished in Brushed Clear, which perfectly complement the car`s exterior Austin Yellow.

In the engine department, this Austin Yellow F80 BMW M3 packs the same 3.0-liter M TwinPower Turbo inline six-cylinder engine with 431 horsepower and 500 Nm of torque, enough to deliver a sprint from 0 to 100 km/h in just 4.3 seconds, hooked to a six-speed manual transmission. However, equipped with a seven-speed MDC-T, the same sprint is done in just 4.1 seconds.

Full details can be found in the media gallery below!

The post Hot F80 BMW M3 in Austin Yellow and HRE Wheels Pops-Up Online appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

I have seen hundreds of projects on BMW M2 Coupe, but I have never seen such a profound take. I am just crazy about the program and I decided to let you know about it too.

Besides the Black Sapphire Metallic exterior wrap which enhances its extremely aggressive look and attitude, this crazy M2 has also received HRE`s freshest set of wheels and a carbon fiber aero kit.

The wheels are finished in Satin Black and measure 19 x 9.5 and 19 x 10.5 front and rear, respectively, and are part of the tuner`s Series P1, which are the best-selling forged wheels ever. They increase the car`s grip and stability and provide more downforce, especially since they sit on a monoblock platform.

As for the car`s looks, the owner chose a carbon fiber aero kit which is a killer in contrast with the new wheels and magnificent Black Sapphire. It involves a new carbon-fiber front-splitter, rear decklid spoiler and rear diffuser, all of them increasing the M2`s airflow and stability.

Performance wise, this M2 Coupe still comes with the stock 3.0-liter straight-six M TwinPower Turbo engine, developing 370 horsepower and 450 Nm of torque. Equipped with a six-speed manual, the sprint from 0 to 100 km/h is done in 4.5 seconds, but with the seven-speed M Dual Clutch Transmission, the model runs the same straight line in an impressive 4.3 seconds. The topping is electronically limited at 250 km/h.

You can find out more exciting details about the gorgeous BMW M2 Coupe in the media gallery below! Enjoy and don`t forget to share your opinions with us!

The post This Is a Magnificent Black Sapphire Metallic BMW M2 Coupe with HRE Wheels and Carbon Fiber Aero Kit appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

Besides the M3, there is also the less powerful yet the same stylish F30 BMW 335i, which in the hand of aftermarket specialists can become extremely attractive, more aggressive, and of course, more powerful. Such an example is the below 335i, now coming with new wheels and a couple of extra styling elements at the exterior.

We are looking here at an F30 BMW 335i, now wrapped in Estoril Blue Metallic colour and fitted with the new wheels from well-known tuner HRE Wheels.

HRE Wheels tuner is famous for its high-performance wheels, using the most advanced techniques and flow forming technology, equipping most of its recent projects. The below 335i is also packed with the HRE FlowForm wheels, which allow increase stance and better stability.

They are also sized 19 x 9.5 and 19 x 10.5 front and rear, respectively, and finished in Tarmac Black. In contrast with the car`s Estoril Blue Metallic, the wheels create the perfect match and add a more aggressive look.

As for performance under the hood, there are no signs of any new upgrades, this lad here still packing the same 3.0-liter BMW TwinPower Turbo, also found on the top of the line M3, but packing less power. We are dealing here with 300 horsepower, being sent to the rear wheels via an eight-speed STEPTRONIC automatic transmission with Adaptive Transmission Control (ATC).

The power allows an acceleration from 0 to 100 km/h in just 5.5 seconds, at an electronically limited top speed of 250 km/h. You can find out more about the F30 BMW 350i wrapped with HRE FlowForm wheels in the media gallery below!

The post F30 BMW 350i Looks Smashing with HRE FlowForged Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

You may agree or not that BMW models are extremely easy to modify, but there are rides that can be a real pain. And I personally find the last-gen F10 BMW M5 a real challenge on that matter.

The aftermarket specialists from GMP Performance have managed to squeeze the best out of this gorgeous M5, adding some exterior touches and cool wheels from HRE.

The car`s main attraction is the Monte Carlo Blue exterior wrap, perfectly going hand-in-hand with the front carbon fiber lip spoiler and the new HRE S101 wheels.

The HRE`s wheels are Brushed Gold with Polished Lips, measuring 21 x 9.5 and 21 x 10.5 front and rear, respectively. They also provide the car with increase stance and better stability, not to mention the enhanced aggressive looks.

In the engine department, the technicians from GMP Performance have not added any performance upgrade. This means that it still comes with the same yet high-performance 4.4-liter BMW TwinTurbo engine, with 560 horsepower and 680 Nm of torque.

The sprint from 0 to 100 km/h is done in just 4.2 seconds, at a top speed of 300 km/h, which is quite impressive. You can find out more details in the media gallery below provided by the tuner! Also, don’t forget to share your opinions with us!

The post F10 BMW M5 by GMP Performance Looks Majestic in Monte Carlo Blue Wrap and HRE Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

Recently, the folks over iND Distribution tuner have created a special program on a BMW X5 M which can be admired below. The model is standing out from the crowd with new wheels and a carbon fiber aero kit.

Even if the changes at the exterior can be considered subtle, the model does standout from the crowd with new elements, like the already famous Akrapovic exhaust system and the new rear diffuser, announcing a wilder engine growl and more power under the hood.

It also comes with the new HRE P201 alloy wheels, measuring 22 x 10 and 22 x 12.5 at the front and rear, and finished in Frozen Gold. The new wheels perfectly complement the Melbourne Red exterior wrap, providing a more aggressive look.

Besides the new exterior elements and the HRE wheels, this particular BMW X5 M is also equipped with the Brembo brakes and AC Schnitzer lowering springs, with the installation being carried by Wheels Boutique, another leading tuner worldwide.

Under the hood, this Melbourne Red BMW X5 M has not received any modifications, meaning that it still stays faithful to its 4.4-liter V8 TwinPower Turbo engine, with 575 horsepower and 553 lb-ft of torque. This allows a sprint from 0 to 100 km/h in just 4.0 seconds, at a top speed of 250 km/h.

The post Carbon-Fibered BMW X5 M by iND Distribution Looks Marvelous in Melbourne Red and HRE Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

Just like the below F82 BMW M4 wrapped in the Santorini Blue, I would choose for my own ride the same endless list of M Performance Parts. The reason is pretty simple: they are specially created for such exquisite rides and increase their aggressive looks.

F82 BMW M4 with M Performance Parts and Other Features:

BMW – Performance Gloss Black Side Markers
BMW – M Performance Carbon Fiber Front Splitters
BMW – M Performance Carbon Fiber Rear Diffuser
BMW – M Performance Carbon Fiber DCT Shift Knob
BMW – M Performance Carbon Fiber & Alcantara DCT Console Trim
BMW – M Performance Carbon Fiber Rear Spoiler
Akrapovic Titanium Exhaust System
EAS Personalized Coding
H&R – Sport Lowering Springs
HRE P101 Wheel Set
iND – Painted Front Reflectors
Macht Schnell – Exhaust Valve Control (EVC) Module.

Besides the M goodies, the technicians from EAS have also added the high-performance and Flow Forged wheels from HRE Wheels tuner, adding a more aggressive look and increasing this M4`s stance. As for the engine under the hood, this remains stock. However, it does come with impressive performance.

We are looking here at a 3.0-liter BMW TwinPower Turbo flat-six, also seen on the M3 Sedan. The engine outputs 431 horsepower and 550 Nm of torque being sent to the rear axles via a six-speed manual. The sprint from 0 to 100 km/h is also done in 4.3 seconds, but when hooked with the seven-speed M-DCT transmission, the model runs the same sprint in just 4.1 seconds. The topping is electronically limited at 250 km/h.

The post F82 BMW M4 with M Performance Parts by EAS appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

It is wrapped in the gorgeous Mineral Gray exterior colour and comes with the newly added HRE wheels, which increase its aggressive looks and extraordinary stance.

The wheels refer to the R101LW custom forged alloy wheels which were specially built for track use and other fun activities like burnouts or drifting sessions.

The HRE R101LW are sized 20 x 8.5 and 20 x 10.5 front and rear, respectively and are finished in Frozen Rose Bronze, being wrapped in Michelin Pilot Sport 4S tires, and perfectly built for adrenaline rush. They also provide increase driving dynamics and stability on tight corners at high-speeds.

Besides the new set of wheels, the F82 BMW M4 by HRE Wheels has been also fitted with some new carbon fiber exterior parts commissioned by PSM Dynamic, including the carbon fiber rear diffuser or high-performance Akrapovic bespoke exhaust system, which increases the car`s engine soundtrack. Even so, it seems that this model has not received any modifications under the hood.

Under the hood, even if this F82 BMW M4 comes with a high-performance exhaust system which announces a slight overboost, it still remains stock with the 3.0-liter straight-six engine, with 431 horsepower and 500 Nm of torque. It can thus sprint from 0 to 100 km/h in just 4.3 seconds with a standard six-speed manual transmission, while with the seven-speed M-DCT the same sprint is done in just 4.1 seconds. The top speed stands at 250 km/h.

The post F82 BMW M4 Looks Magnificent on HRE Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

The model looks smashing in the rare Silverstone Metallic II body wrap, and adding the new wheels will make it more aggressive and standout. You could also depict a power boost as well, but from what we know so far, the tuner has not added any of it.

This means that in the engine department, this hot-looking F82 M4 still packs the stock yet high-performance 3.0-liter BMW TwinPower Turbo flat-six, also seen on its little sibling the M3 Sedan. The engine outputs 431 horsepower and 550 Nm of torque, sending the power to the rear via a six-speed manual. The sprint from 0 to 100 km/h is also done in 4.1 seconds, but when hooked with the seven-speed M-DCT transmission, the model runs the same sprint in just 3.9 seconds. The topping is electronically limited at 250 km/h.

Visually, this lad here looks fresh with the new carbon fiber lip and blacked put kidney grille, adding the P101 HRE Wheels, which make the car extremely aggressive and mean-looking. The wheels are high-quality and measure 20 x 8.5 and 20 x 12.5 front and rear, respectively, coming with the outstanding matte black finish and providing the model with an exceptional sporty stance.

To make things even more appealing, the aftermarket specialists have also added some updated mechanics, like the high-performance Brembo GT brakes with yellow calipers. Also, the car`s ride height has been also lowered thanks to the new lowering kit. This increases the M4`s driving capabilities and makes it more rigid and stable on the roads.

The post F82 BMW M4 on HRE Wheels, Installation by Wheels Boutique appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.