While some tuners choose to mess-up with the M4`s performance under the hood, others decide to go for some enhanced visuals. It is also the case of the below Alpine White F82 BMW M4 which has received a nice treatment which comprises new wheels and a carbon fiber aero package.

The first striking thing we should observe at a modified car is the wheels, and for this model in question, the owner choose to wrap it with the high-performance wheels from Vossen tuner. It involves the Vossen Hybrid Forged VFS-5 rims which measure 20 x 8.5 and 20 x 10.5 front and rear, respectively. Wrapped in Gloss Gunmetal finish, they look impressive in Michelin Pilot Sport + tires.

As for the carbon fiber aero package, the Alpine White F82 BMW M4 is fitted with new elements that enhance the car`s aggressive looks. All courtesy of another famous German tuner which is AC Schnitzer, also a dedicated BMW aftermarket shop. We are looking here at a front lip spoiler, rear decklid spoiler and rear diffuser.

Sadly, there are no words of any updates under the hood. We might have been looking here at the perfect package. This means the same 3.0-liter BMW TwinPower Turbo flat-six, also seen on its little sibling the M3 Sedan. The engine outputs 431 horsepower and 550 Nm of torque, sending the power to the rear via a six-speed manual. The sprint from 0 to 100 km/h is also done in 4.1 seconds, but when hooked with the seven-speed M-DCT transmission, the model runs the same sprint in just 3.9 seconds. The topping is electronically limited at 250 km/h.

The post Alpine White F82 BMW M4 Looks Awesome with Vossen Wheels and AC Schnitzer`s Carbon Aero Kit appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

You should also check:
– Matte Black BMW i8 by EDC
– “Suicide Squad” BMW i8 by Rene Turrek
– This Is Eve.Ryn`s Special Built BMW i8 Dark Night
– AC Schnitzer Previews BMW i8 with Carbon Aerodynamic Accessories ahead Geneva
– BMW i8 with Black Wrap Wears HRE Wheels, Installation by Wheels Boutique

The BMW i8 is both a powerful and environmentally concerned car. Its rounded lines make it one of the most beautiful BMW models that the Bavarian manufacturer offers in its range. From the outside it resembles a gas guzzling supercar while from the interior it looks more like a high tech Japanese all-in-one driving solution. The fact is the BMW i8 is both of those and so much more at the same time. Regardless of how you see the i8, it will surprise you in every imaginable way possible.

This particular BMW i8 builds on this concept of surprise by attempting to go beyond certain limits the Bavarian manufacturer seems to have imposed in the manufacturing process of this particular model. Right from the beginning the bright red paint on this particular model strikes as unusual. The use of Melbourne Red for this special i8’s paintjob was a grand idea. The color choice seems to bring out the car’s personality making it much more visible. The color also makes the car’s round design lines look more visible.

Making the car stand out even more are the 21 inch Vossen Forged LC-109T rims, a solid choice that seems to look twice as cool in the chosen gloss silver finish. The pattern of the rims fits very well with the rest of the car’s personality. Wheel size makes the car look sporty. This particular choice seems to improve the car’s aspect in every way possible. The idea of a Melbourne Red BMW i8 with Vossen rims is a successful, bold move towards making this particular model stand out.

With a top speed of 250km/h and a new, more evident personality, this particular BMW i8 seems to create a perfect balance between how it looks and how it performs. It is without a doubt one of the most interesting renditions of this model. The amazing fact about the Melbourne Red BMW i8 with Vossen Rims is that it retains the core BMW spirit that the Bavarian automaker includes in each and every vehicle it produces.

The post Melbourne Red BMW i8 with Vossen Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

The latest BMW M3 to receive an exquisite treatment is the one seen below and wrapped in Nardo Grey exterior colour. It sits extremely low and wears the Vossen`s special forged wheels. Of course, this isn’t a ride to be driven on dangerous road conditions, so you`d better stick to the wheels alone, without the new air suspension.

We are dealing here with the Vossen`s LC-106T forged wheels, coming with an exquisite directional spoke design which adds the “moving while still” impression. They are also measuring 20 x 10.5 at the front and 20 x 11.5 at the rear, and are finished in Brushed Polish, providing the perfect blend with the car`s body wrap.

As aforementioned, this hot-looking Nardo Grey BMW M3 has been also fitted with a new air-ride suspension which lowers the car`s ride height until it reaches the ground. Other features at the exterior that enhance the aggressive look refer to carbon fiber front spoiler, side skirts, rear diffuser or rear decklid spoiler.

Underneath the skin, the Nardo Grey F80 BMW M3 is packing the stock 3.0-liter inline six-cylinder engine, with 431 horsepower and 500 Nm of torque on board, and a 4.1 second sprint from 0 to 100 km/h. The top speed is electronically adjusted at 250 km/h.

The post One-Off BMW M3 Wears Vossen`s Forged Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

The Vossen Wheels tuning have fitted the 1-Series with the Vossen CVT wheels, custom-made for this particular model, which adds up improved stance and greater stability. The wheels are perfectly complementing the exterior body color, along with the new lowering kit.

Surely that this would be just enough to add a stronger personality to the car, without heavily modifying it with a fully-customized body kit. The model is now refreshed and ready to be driven on the crowded streets of your favorite city. A photo session has been also released by the Vossen Wheels tuning!

The BMW 1-Series, even in its stock version, remains one of the most exotic sports car the company has ever had, impressing its fans all over the world with the outstanding design lines and impressive power under the hood. For instance, in the 335i, the version comes with the 3.0-liter twin-turbo straight six, with 306 horsepower and 400 Nm of torque, which is enough to reach 100 km/h in just 5.3 seconds.

The post BMW 1 Series Coupe Riding on Vossen CVT Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

And today we also have the pleasure and the honor of seeing the BMW i8, the carmaker`s first plug-in hybrid version and the winner of the 2015 Engine of the Year Award, wearing the gorgeous Forged VPS-309 set of wheels.

The forged VPS-309 wheels are extremely light and provide this BMW i8 with a unique look and extraordinary stance, given the fact that the plug-in hybrid was also lowered, with the new lowering springs. The Vossen Wheels Tuning has also released some photos with this complete BMW i8.

No mods have been carried out under the hood, this BMW i8 packing the same 1.5-liter turbocharged three-cylinder engine, with 231 horsepower being delivered to the rear wheels, while the electric motor that backs it, provides an additional 131 horsepower, sent to the front wheels. The BMW i8 is also coming with a 35 km mile range, at a topping of 120 km/h.

The post BMW i8 on Vossen Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

Still, this latest BMW 4 Series from Vossen Wheels seems to do a bit more that that, even if just barely.

First off, the main attraction to this project are the new wheels, which Vossen calls CV3, and measure 20 inch in diameter. Then again, the same wheels might also be the ones that some might say ruin the whole build, and that is solely because of the white finish.

I wouldn’t say it ruins the build, as white is the overall theme of the car. But I will say Vossen took a bit of a gamble with this build. And just to be more than just new wheels, the BMW 4 Series also got some other body parts. These include a new front bumper and splitter that go well with the M Sport package.

The post BMW 4 Series by Vossen Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

Yet, as simple as that sounds, it can actually be quite easy to mess it up, and if you ask me, this BMW 5 Series is a prime example of just that.

If the owner would have just stuck to a simple wheel swap, the new 20 inch Vossen set would have worked wonders. That being said, there are better wheels out there if you want to tune your BMW 5 Series. But that is not the whole deal with it.

As you can plainly see, a gold wrap was applied to the car, while also installing very low suspensions. The effect would have been a “bling” kind of tune, but this being a BMW 5 Series, it just doesn’t really work. All the owner managed to do here is ruin a perfectly good car. Not to mention he had to pay to get it ruined like this. I don’t mind a few bling tunes out there, but this isn’t the right car for it.

The post BMW 5 Series with Vossen wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

It all depends on that one feature that turns your head and makes you go “now that is just cool”.

In the case of this F30 BMW 335i, it’s all about the wheels Vossen put on it. And for a better effect, the car is also in a nice yellow wrap with some cool black details.

It is not a bad combination, but the craftsmanship is not flawless as f30 forum users quickly pointed out. an air bubble got lodged beneath the foil, ruining the whole front end.

The F30 BMW 335i is part of the Vossen world tour, and it stands out among them, despite the workmanship flaw.

The post F30 BMW 335i on Vossen wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

The model used for this particular launch is a 640i. As usual with this company, the performance aspect is not the most important in the mix.

What is important is that on this occasion, aside from introducing a variety of photos with the alloys they’re preparing for the 640i, there’s also a video.

There’s a nice city backdrop, with varying weather, for the still shots and then there’s a bit of highway driving footage mixed in as well.

A set of 22 inch rollers can usually be considered as a total inconvenience when moving but the ones in this scene are portrayed as if they’re almost usable.

Stunning, it’s probably the simplest way to describe their VVS-CV3 Matte Black machined 22 inch alloys. I’m fairly confident the car’s stance also helps.

Not only does the 6 Series Gran Coupe have a well thought out presence on the road, in this case a custom H&R suspension kit was employed to make the best of the situation visible.

I’m also not sure about the way the tinted windows on this car. Perhaps there’s some foil action or maybe there’s some effects work.

After all, I know the BMW 6 Series Gran Coupe doesn’t have the biggest greenhouse around but it seems like it gets a little too dark for normal lighting conditions.

This was actually tipped off by the headlamps which don’t seem to light up properly.

The post BMW 6 Series Gran Coupe goes Vossen appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.

They really care about presentation and they want to showoff not only what they’re making, but what car their products are actually going on.

We’ve seen them unveil quite a few of their products alongside the lovely BMW models we’re fans of and they’ve all struck a cord.

It may be because this time, the car used is one of the best looking models in BMW’s history and certainly the best four door they currently make.

What I’m talking about is the BMW 6 Series Gran Coupe. It’s a model that swaps out the standard rollers for brand new 22 inch CV3 concave rims.

Vossen haven’t exactly reinvented the wheel here but they did addapt them to the 6 Series Gran Coupe. Precise dimensions of 22×9 for the front and 22×10.5 inches for the rear speak bundles.

The five spoke design looks as sporty as it ever did and the black trimming around it does nothing but accentuate the same appearance.

The inner freak show inside me does worry. It’s mostly because in the same way that you can’t see the black trim, you can’t really see the tires.

I’m assured they’re there and the idea of floating wheels doesn’t quite stack up, but what’s there doesn’t appear to be tires.

It all just seems like plastic tires you can get on toy cars. You know the kind, the sort which really crashes about even on a grain of dust.

The post BMW 6 Series Gran Coupe on Vossen Wheels appeared first on BMW Car Tuning BLOG - BMW Car Modifications and Customization.